Raster data such as bitmap images cannot be adjusted. Check with your administrator. The resolution setting is selected in the [Advanced] tab of the printer driver properties window. Ask your administrator to perform [Registration Adjustment]. Windows If auto configuration cannot be executed, see the Software Setup Guide.
|Date Added:||9 May 2007|
|File Size:||53.82 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The machine must be connected to the same network as your PC. The setting is selected in the [Page Setup] menu. Select “Auto” or “Color” for the color mode setting. Open the printer properties dialog box and click the [Auto Configuration] button on the [Options] tab. Have the peripheral devices that are installed on the machine been configured with the printer driver? If the colors are still off after calibration, repeating calibration may improve the results.
When 2-sided printing is performed, each page may be printed upside down depending on when the staple position setting. Set the staple position correctly.
COLOR PRINTING DOES NOT TAKE PLACE
Check the PC settings. Check with your administrator. If the IP address is changed, reconfigure the port setting for the printer driver. Windows If auto configuration cannot be executed, see the Software Setup Guide.
Wait at least 10 seconds and then turn the main power switch to the ” “position. Correct brightness and contrast with [Color Adjustment Settings] on the [Color] tab of the printer driver. Use these settings to make simple corrections in a case such as when image editing software is not installed on your computer. When you need a very clear image, select [Fine]. Double-click the printer icon that appears at the lower right of the task bar, open the [Printer] menu, and click [Cancel All Documents] or [Purge Print Documents].
However, when the paper can only be loaded in a fixed orientation, the image may be printed upside down.
To have color text or lines areas that could become faint converted to black, select [Text To Black] or [Vector To Black] on the [Color] tab of the printer driver. The setting is selected in the [Layout] menu of the print window.
Set the print orientation to match the image. The setting is selected in the [Main] tab of the printer driver. After the main power indicator changes from flashing green to the lit up state, press the [POWER] button.
COLOR PRINTING DOES NOT TAKE PLACE | MXN/MXN/MXN/MXN USER’S MANUAL
If the [Disable Duplex] checkbox is2-sided printing using that tray will not be possible. Change the paper type setting to a type that can be used for 2-sided printing. Select the resolution in the [Advanced] menu of the print window. Check the Notice Page. If you do not know which network the machine is connected to, ask the network administrator.
Printing is sometimes not possible when you run multiple applications at once or there is insufficient memory or hard drive space. The setting is selected in the [Paper Select] tab of the printer driver.
Set the margins correctly in the layout settings of the application. Double-click the name of the machine in the printer list, select the job that you wish to delete, and delete it.
Raster data such as bitmap images cannot be adjusted. The color mode setting is configured on the [Color] tab of the printer driver. See also the Software Setup Guide. In this event, rotate the image degrees before printing.